# P6SLite EasyVMS Installation Guide

- Bağlantı: https://www.dvrdestek.com/p6slite-easyvms-installation-guide/
- Yayımlanma: 2024-08-07T16:33:27+03:00
- Yazar: M.Salih ASLAN

P6SLite EasyVMS Installation Guide, Support cloud device addition and management,
Provide streaming media storage and playback functions, monitor the playback connection
status, and provide relevant status notifications,The system is more streamlined,
more convenient to operate, green and ad-free

## Table of Contents

[P6SLite For Pc Function](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-p6slite-for-pc-function-0)
[System operating environment](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-system-operating-environment-1)
[P6SLite EasyVMS Installation Guide](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-p6slite-easyvms-installation-guide-2)
[Install and login to P6SLite For Pc](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-install-and-login-to-p6slite-for-pc-3)
[Interface Introduction](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-interface-introduction-4)
[Device Management](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-device-management-5)
[Zone configuration](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-zone-configuration-6)
[ADD P6SLite Camera](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-add-p6slite-camera-7)
[Delete Camera](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-delete-camera-8)
[Upgrade Camera](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-upgrade-camera-9)
[Remote playback](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-remote-playback-10)
[Video retrieval](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-video-retrieval-11)
[Device control](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-device-control-12)
[Time synchronization](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-time-synchronization-13)
[System settings](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-system-settings-14)
[Real-time preview](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-real-time-preview-15)
[Real-time preview](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-real-time-preview-16)
[Right-click menu control](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-right-click-menu-control-17)
[Set up P6SLite camera](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-set-up-p6slite-camera-18)
[OSD settings](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-osd-settings-19)
[Image settings](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-image-settings-20)
[Network configuration](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-network-configuration-21)
[Encoding settings](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-encoding-settings-22)
[Alarm settings](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-alarm-settings-23)
[Client logs](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-client-logs-24)
[Electronic photo album](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-electronic-photo-album-25)
[Alarm information](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-alarm-information-26)
[View alarm information](https://www.dvrdestek.com/p6slite-easyvms-installation-guide/#toc-view-alarm-information-27)

P6SLite For Pc software name is EasyVMS, you can [download the software here,](http://www.p6spro.com/)
support Windows PC.

## **P6SLite For Pc Function**

• Support cloud device addition and management

• Support APP account login and registration

• The system is more streamlined, more convenient to operate, green and ad-free

• Realize centralized user management, fault management, system maintenance and 
TOPO navigation

• Provide streaming media to distribution function

• Provide streaming media storage and playback functions, monitor the playback connection
status, and provide relevant status notifications

• Maximum performance of the software

• Maximum number of device logins: 64pcs real-time preview channels: 36 channels

• Maximum number of access channels 256 channels Number of remote playback channels
1 channel

• Maximum number of search devices: 256pcs Remote recording query channels: 1 channel

• Maximum number of local users 16 Number of local playback channels 1 channel

• Maximum number of cloud accounts 1 Number of local recording query channels 1 
channel

## **System operating environment**

Operating system: Microsoft Windows 7, 8.1, 10 compatible with some XP systems

CPU: Intel AMD 32-bit or 64-bit

Memory: 2G or higher

Note: Due to the different operating systems and hardware of the PC platform, the
smoothness and functionality of the software are affected to varying degrees

## P6SLite EasyVMS Installation Guide

## **Install and login to P6SLite For Pc**

Find the file [⌊easyvms⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/easyvms.jpeg)
in the software directory, double-click the EasyVMS installation file to install
the client software, and the login dialog box will pop up, as shown below. The current
page will be adapted according to the full Chinese and English systems.

[⌊install and login to p6slite for pc 680w363h⌉⌊install and login to p6slite for pc 680w363h⌉[ [⌊install and login to p6slite for pc⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/install-and-login-to-p6slite-for-pc.jpeg) [⌊install and login to p6slite for pc 1⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/install-and-login-to-p6slite-for-pc-1.jpeg) [⌊install and login to p6slite for pc 2⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/install-and-login-to-p6slite-for-pc-2.jpeg) [⌊install and login to p6slite for pc 3⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/install-and-login-to-p6slite-for-pc-3.jpeg)

Then click Run EasyVMS software [⌊easyvms v3 0 0 user manual 23 2 233605⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/easyvms-v3-0-0-user-manual-23-2-233605.jpeg)
and choose the language that suits you to log in to the system;

**Local login user name default: **admin, **password default:** empty; After logging
in, select the software in the upper right corner  [⌊easyvms v3 0 0 user manual 23 2 233798⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/easyvms-v3-0-0-user-manual-23-2-233798.jpeg)
to log out of the software;

Cloud account login, please enter APP P6SLite account, currently supports scanning
code login and manual account input (manual input requires attention to the choice
of server)

[⌊install and login to p6slite for pc 680w459h⌉⌊install and login to p6slite for
pc 680w459h⌉[

## **Interface Introduction**

The main navigation buttons at the top of the interface are real-time preview, remote
playback, electronic album, device management, system log, alarm information, plan
recording, system settings, click the navigation button to enter the corresponding
configuration interface. On the left side of the interface is the device navigation,
on the right is the display area, and in the upper right corner are the help, logout,
minimize, maximize, and close buttons. Start with device management and add devices.

[⌊interface introduction 680w413h⌉⌊interface introduction 680w413h⌉[

## **Device Management**

Click the Device Management button to enter the Device Management page, as shown
in the following figure; On the device management page, you can perform manual adding,
modifying, batch deleting, batch upgrading, APP cloud account management, region
adding, as well as batch adding, batch modifying IP, and successfully added devices,
right-click remote settings, time synchronization, clear alarms, display QR codes
and other functions.

[⌊device management 680w415h⌉⌊device management 680w415h⌉[

## **Zone configuration**

For easy zone device management (the default zone is preferred when added by camera),
you can right-click the default zone to customize the new zone, or click Add Zone
below.

[⌊zone configuration 680w413h⌉⌊zone configuration 680w413h⌉[

## **ADD P6SLite Camera**

Click the refresh button in the lower right corner to search for the P6SLite camera

[⌊p6slite camera addition removal and upgrade 680w413h⌉⌊p6slite camera addition 
removal and upgrade 680w413h⌉[

Select the IP address of the camera, then click “Batch Change IP” to modify the 
IP address of the camera.

[⌊p6slite camera addition removal and upgrade 680w362h⌉⌊p6slite camera addition 
removal and upgrade 680w362h⌉[

If you don’t know how to modify the IP address, please check the “Refer to the computer
network card to set the IP” software will automatically modify the IP address according
to your network environment, of course, you can also manually modify the IP address.

The default user name of the device: admin, password: empty, click Confirm, save
the modified IP address, and then click the refresh button again, search for the
new IP address again, and then select the IP address and click Add in bulk.

[**See also  How To SetUp P6SLite Camera (Complete Manual )**](https://www.camapp365.com/p6slite/setup-p6slite-camera-manual%7CTAXOPRESSENTITY34TAXOPRESSENTITY%7C%20%5Ct%20%7CTAXOPRESSENTITY34TAXOPRESSENTITY%7C_blank)

[⌊p6slite camera addition removal and upgrade 680w389h⌉⌊p6slite camera addition 
removal and upgrade 680w389h⌉[

Then click the real-time preview button to enter the preview interface

[⌊p6slite camera addition removal and upgrade 680w413h 1⌉⌊p6slite camera addition
removal and upgrade 680w413h 1⌉[

Double-click the IP address of the camera on the right, and the video will be automatically
displayed in the surveillance screen on the right.

If you add multiple devices, you can select the Default Region context menu and 
select Turn on automatically, Open by region, Close preview by region.

[⌊p6slite camera addition removal and upgrade 680w414h⌉⌊p6slite camera addition 
removal and upgrade 680w414h⌉[

### Delete Camera

Select one or more devices to be deleted in the device list, click the Delete button,
the system will prompt whether to confirm the deletion of the device, click the [
OK] button, the device on the default zone list will be deleted.

[⌊delete camera 680w413h⌉⌊delete camera 680w413h⌉[

### Upgrade Camera

Local upgrade: Select the device you want to upgrade in the list of added devices,
and then select Bulk upgrade. Be sure to restore the factory settings after the 
upgrade is successful.

[⌊upgrade camera 680w413h⌉⌊upgrade camera 680w413h⌉[

Cloud Upgrade: Select the device to be upgraded in the list of added devices, and
then select Cloud Upgrade (whether the device supports cloud upgrade), otherwise
the Cloud Upgrade page will not be prompted

[⌊upgrade camera 680w413h 1⌉⌊upgrade camera 680w413h 1⌉[

## **Remote playback**

### Video retrieval

Enter the remote playback interface, select the channel that needs to be played 
back on the left device tree (Note: currently only supports one playback all the
way), select the date on the calendar, click the “Search” button, the system starts
to search for the recording in the hard disk recorder (or local hard disk), and 
display the search results in the search results panel. As shown in the following
figure:

[⌊video retrieval 680w413h⌉⌊video retrieval 680w413h⌉[

#### Playback control

[⌊playback control⌉⌊playback control⌉[

**Control Buttons**

• [⌊p6slite icon 1⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/p6slite-icon-1.jpeg)
Play button, tap when the recording stops to resume playback.

• [⌊p6slite icon 2⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/p6slite-icon-2.jpeg)
Pause the playback button, tap the playback pause while the recording is playing,
and tap again to resume playback.

• [⌊p6slite icon 3⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/p6slite-icon-3.jpeg)
Stop playing button, tap while playing to stop the screen.

• [⌊p6slite icon 4⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/p6slite-icon-4.jpeg)
Audio control button, tap to turn on/off audio playback during playback.

• Choose  [⌊p6slite icon 5⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/p6slite-icon-5.jpeg)
hasten  [⌊p6slite icon 6⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/p6slite-icon-6.jpeg)
Slow down Fast/slow rate control is possible.

• Click  [⌊p6slite icon 7⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/p6slite-icon-7.jpeg)
Playback capture button, you can take a screenshot of the playback screen.

**Timeline operations**

(1) The scale on the timeline is 0-24 points.

(2) Mouse over the timeline to scroll to zoom in and out of the timeline.

(3) Double-click the timeline to play it directly.

## **Device control**

The device management interface can also control the device, including: time synchronization,
camera restart, clear alarm, etc.

### Time synchronization

In the Device Management > the Added Device interface, select the device and click
the [Time Sync] button to synchronize the device time with the PC time.

[⌊time synchronization 680w252h⌉⌊time synchronization 680w252h⌉[

## **System settings**

Click System Settings to enter the local settings of the software.

[⌊system settings 680w413h⌉⌊system settings 680w413h⌉[

1.You can set the EasyVMS software to automatically open at startup, check the button
[⌊icon p6slite⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/icon-p6slite.jpeg),
and save. After saving, EasyVMS will automatically run after the next boot.

2.You can set the automatic calibration interval time of the device, check the button
[⌊icon p6slite 1⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/icon-p6slite-1.jpeg),
and enter the interval time (such as: 120). After saving, each device will automatically
calibrate every 120 minutes. It is recommended to calibrate every 30 minutes

3.You can set the local recording duration, select the recording duration input 
box, and enter the recording duration (for example: 30). Once saved, each recording
is saved with an interval of 30 minutes. You can also set the recording format and
select the recording format (e.g. PRV/AVI). After saving, the local recording format
is . PRV.  A dedicated PRV player can be downloaded on the official website

4.You can set the log retention period and directly select the recording duration(
e.g. six months). Once saved, logs are retained for six months.

5.You can set the capture and video saving path, click to select the path, such 
as (G: EasyVMSImage/ G: EasyVMSVideo). After saving, the capture path is set to 
G: EasyVMSImage, the recording path is set to G: EasyVMSVideo.

**Account management: Enter the system settings interface to manage local account
login, including creating operator users, creating guest users, modifying user passwords,
and deleting devices.**

Click the “System Settings” button, click the “Account Management” button, click[
Create], enter the new user name, password and user group (such as operator) to 
save, the user group will have one more new user “user1”.

[⌊system settings 680w286h⌉⌊system settings 680w286h⌉[

Click the [Account Management] button, select the operator user user1, and click[
Delete]. After deletion, the new user disappears.

**Currently, there are three levels of user permissions:**

• **Administrator: **Administrator privileges, which can perform device management,
user management, video monitoring, video playback, log query, switch users, and 
log out of the client.

• **Operator: **Video monitoring, video playback, log viewing, user switching, password
modification.

• **Guest:** Video monitoring, switching users, password modification.

## **Real-time preview**

### Real-time preview

Double-click the device name in the left device to open a preview of all channels
of the device on the right preview interface, as shown below:

[⌊real time preview 680w414h⌉⌊real time preview 680w414h⌉[

To turn off single-way preview, you can right-click “Close Preview” on the list 
that pops up the video channel to turn off the channel preview.

[⌊real time preview 680w414h 1⌉⌊real time preview 680w414h 1⌉[

Right-click the default region in the device bar on the left and select “Turn off
preview by region”

#### Preview controls

On the Preview Actions tab, the following figure is shown.

[⌊preview controls 667w⌉⌊preview controls 667w⌉[

• The icon  [⌊icon 7⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/icon-7.jpeg)
is to turn off the full channel preview button, clicking it will close all preview
screens.

• The icon  [⌊icon 8⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/icon-8.jpeg)
is the capture button, click to capture the current channel image to the local computer.

• The icon  [⌊icon 1⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/icon-1.jpeg)
is the on/off full-channel recording button, clicking it will enable/disable full-
channel recording.

• The icon  [⌊icon 2⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/icon-2.jpeg)
is the on/off audio button, clicking it will turn channel audio on/off.

• The icon  [⌊icon 3⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/icon-3.jpeg)
is the screen split button, click to set the number of screen split paths, currently
supports single screen, four screen, nine screen, sixteen screen, twenty-five screen,
thirty-six screen road preview.

• The icon  [⌊icon 4⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/icon-4.jpeg)
is a preview of the next video screen, which can be used in single screen, four 
screen, nine screen, sixteen screen, twenty-five screen, thirty-six screen, etc.

• The icon  [⌊icon 5⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/icon-5.jpeg)
is a full-screen toggle button, click to switch to full-screen preview. In full 
screen, you can right-click “exit full screen” or press the keyboard ESC key to 
exit.

• The icon  [⌊icon 6⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/icon-6.jpeg)
is a group tour, and you can group the picture in the case of many cameras or NVR
images. Then make a grouped preview

### Right-click menu control

Select the real-time preview channel on the preview interface and right-click to
bring up the right-click control menu, as shown below:

[⌊right click menu control 680w413h⌉⌊right click menu control 680w413h⌉[

• Click the [Close Preview] button, and the preview of the current channel screen
will be closed.

• Click the [Turn on sound] button to open the audio preview for the current channel.

• Click the [Capture] button, the capture of the current channel is turned on, and
the image is saved locally.

• Click the [Start Recording] button to enable single-channel recording on the current
channel, and save the recording to the local computer.

• Click the [Screen Scale] button to set the current preview screen scale to the
original scale or fill scale.

• Click the [Full screen] button to switch the preview screen to full screen. Consistent
with the Full Screen feature in the toolbar below the preview action page.

• Click the [Clarity] button to set the channel quality as the main stream/substream(
valid only for P2P (added by ID number) settings).

• Click the [Voice Intercom] button to shout to the front-end camera.

• Click the [Electronic Magnification] button to perform electronic amplification
operation on the channel.

• Click the [Remote Configuration] button to set the camera parameters

## **Set up P6SLite camera**

### OSD settings

you can add the name of the current camera and the placement of the moving time;
Click the red font to move

[⌊osd settings 680w507h⌉⌊osd settings 680w507h⌉[

### Image settings

Night vision mode; Set the night market mode on a dual-light device to achieve a
full-color image at night.

IR-CUT sensitivity (the higher the modified value, the higher the sensitivity): 
The earlier the black and white image is switched at night.

IR-CUT switching time (the larger the modification value, the longer the switching
time): Extend the time to switch black and white images.

The image is flipped, and the image can be selected to be corrected by software 
when the camera is hoisted.

[⌊image settings 509h⌉⌊image settings 509h⌉[

### Network configuration

#### Network Setting

modify the IP address required by the camera in the network

[⌊network configuration 680w⌉⌊network configuration 680w⌉[

#### WiFi settings

Select SSID (wifi name), click search, enter wifi password.

[⌊wifi settings 680w324h⌉⌊wifi settings 680w324h⌉[

After filling in the wifi name and password, select Check wireless settings, it 
will pop up to check the validity of wifi configuration (display failure, please
check wifi password or refresh the page) If the wifi configuration is successful,
then unplug the wire, the real-time preview screen will be black or stuck after 
about 30 seconds to return to normal (the camera is switching network card)

[⌊wifi settings 509h⌉⌊wifi settings 509h⌉[

Normal wifi and wifi hotspot mode switching: a When the camera is powered on, the
camera will automatically switch to wifi hotspot direct connection without plugging
in the network cable;

When the camera is powered on first in the network cable or plugged in the network
cable first, the camera will switch to normal wifi mode. C Manually force switch
between normal wifi and wifi hotspot camera will restart

#### Port setting

HTTP/signaling/data port modification in the corresponding access software, need
to manually add to modify the port number, otherwise it can not be effectively accessed(
non-professionals do not recommend modification, so as not to add device failure)

#### Mail settings

enable and configuration methods

[⌊mail settings 680w507h⌉⌊mail settings 680w507h⌉[ [⌊mail settings 680w507h 1⌉](https://www.dvrdestek.com/wp-content/uploads/2024/08/mail-settings-680w507h-1.jpeg)

#### FTP settings

[⌊ftp settings 680w507h⌉⌊ftp settings 680w507h⌉[

### Encoding settings

#### encoding parameters

Modify the format and appropriate parameters of the video picture to achieve the
best effect.

[⌊encoding parameters 680w507h⌉⌊encoding parameters 680w507h⌉[

#### audio settings

input volume refers to the size of the camera microphone recording, the larger the
value, the louder the playback sound of the monitoring device; The output volume
refers to the sound played by the camera horn, the higher the number, the louder
the sound played by the camera.

[⌊audio settings 680w507h⌉⌊audio settings 680w507h⌉[

### Alarm settings

#### Motion detection

Refers to the way to enable or disable motion detection, and the way to trigger 
the motion detection alarm is to trigger the email (capture a picture when the alarm
is sent to the specified mailbox by email, and the mailbox must be set up first);

Trigger FTP (capture a picture when alarming, and send the picture to the FTP terminal
through the set FTP server); Linkage push (refers to whether to receive camera alarm
reminders, the subscription function on the home page needs to enable linkage push);

Trigger capture (a picture will be captured when a moving signal is detected, and
the captured picture can be viewed in the message function on the home page); trigger
recording (recording in different colors after detecting a moving signal);

Select the area (refers to the selected area on the screen with a movement signal
will alarm, the selected area is subject to the green box)

[⌊motion detection 680w507h⌉⌊motion detection 680w507h⌉[

## **Client logs**

Enter the system log interface, select the client log, select the user, start time,
end time and other conditions to filter, click the [Query] button, you can query
all the operation log information according to the conditions, each log information
includes the operation user name, machine IP, time, description and other information.

Click the Export button to save the operation information as a .csv format file,
as shown in the following figure. ：

[⌊client logs 680w413h⌉⌊client logs 680w413h⌉[

## **Electronic photo album**

The electronic album is mainly used for the management of local channel capture 
and post-recording files, and users can search for viewing and deleting a series
of operations according to different filter types.

[⌊electronic photo album 680w413h⌉⌊electronic photo album 680w413h⌉[

Search by device, select any device, and search for local pictures and videos under
that device.
 Search by date, select a date (e.g. June 5) to search for local images
and videos under that date. Search by media type, select the image/video type (e.
g. Video) to search all local video files. In addition, you can delete and jump 
the playback operation of the picture/video, and directly select the file and right-
click to execute.

## **Alarm information**

The alarm information interface records all types of alarm information of the software,
including motion detection, video loss, alarm input, heartbeat loss, etc., and users
can view, export and backup operations on various alarm information.

### View alarm information

Select the alarm information type (for example, only check Video Loss and Alarm 
Input) to view all categories of alarm information: click the [Export] button, select
the save path, and export the alarm information to the local computer.

[⌊view alarm information 680w413h⌉⌊view alarm information 680w413h⌉[

.